rectron semiconductor technical specification features * plastic package has underwriters laboratory * glass passivated chip construction * 1500 watt surage capability at 1ms * excellent clamping capability * low zener impedance * fast response time maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. tvs 1.5fmcj series do-214ab 1500 watt peak power 5.0 watts steady state surface mount gpp transient voltage suppressor dimensions in inches and (millimeters) notes : 2. mounted on 0.31 x 0.31 (8.0 x 8.0mm) copper pads to each terminal. maximum ra tings (at t a = 25 o c unless otherwise noted) 3. measured on 8.3ms single half sine-wave or equivaient square wave, duty cycle = 4 pulses per minute maximum. 1. non-repetitive current pulse, per fig.3 and derated above t a = 25 o c per fig.2. devices for bipolar applications for bidirectional use c or ca suffix for types 1.5fmcj6.8 thru 1.5fmcj200 electrical characteristics apply in both direction 4. v f = 3.5v on 1.5fmcj6.8 thru 1.5fmcj90 diveces and vf = 5.0v on 1.5fmcj100 thru 1.5fmcj400 devices. 2003-12 ratings steady state power dissipation at t l = 75 o c ( note 2 ) peak forward surge current, 8.3ms single half sine wave-superimmposed on rated load( jedec method )( note 2,3 ) maximum instantaneous forward voltage at 50a for unidirectional only symbol p m(av) i fsm v f t j , t stg volts -55 to + 150 0 c units ( note 3,4 ) amps peak power dissipation with a 10/1000us ( note 1,2, fig.1 ) minimum 1500 5.0 200 see notes 4 watts value operating and storage temperature range p ppm watts peak pulse current with a 10/1000us waveform( note 1, fig.3 ) i ppm amps see table 1 0.006 ( 0.152 ) 0.012 ( 0.305 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) 0.320 ( 8.13 ) 0.305 ( 7.75 ) 0.030 ( 0.76 ) 0.060 ( 1.52 ) 0.079 ( 2.06 ) 0.103 ( 2.62 ) 0.260 ( 6.60 ) 0.280 ( 7.11 ) 0.220 ( 5.59 ) 0.245 ( 6.22 ) 0.125 ( 3.17 ) 0.115 ( 2.92 ) downloaded from: http:///
rectron rating and characteristic curves ( 1.5fmcj6.8 thru 1.5fmcj200ca ) fig. 2 - pulse derating curve peak pulse power (ppp) or current t a , ambient temperature,( ) 02550 75 100 125 150 175 200 100 7550 25 0 (ipp) derating in percentage,% pulse width (td) is definedas the point where the peak current decays to 50% of i ppm 10/1000usec. waveformas defined by r.e.a. peak valueippm tr = 10usec. i ppm , peak pulse current,% t, time,ms 0 0 1.0 2.0 3.0 4.0 50 100 150 half value - i ppm 2 fig. 3 - pulse waveform td fig. 1 - peak pulse power rating curve p ppm , peak pulse power, kw t p , pulse width, sec non-repetitivepulse waveform shown in fig.3 t a = 25 0.31x0.31"(8.0x8.0mm)copper pad areas 100 10 1.00.1 0.1us 1.0us 10us 100us 1.0ms 10ms fig. 4 - maximum non-repetitive forward ifsm, peak forward surge current, number of cycles at 60 hz 8.3ms single half sine-wave jedec method surge current unidirectional only 200 160 0 40 80 120 1 10 100 amperes fig. 5 -steady state power derating curve pm(av), steady state power t l , lead temperature ( ) dissipation, watts 5.003.75 2.50 1.25 0 0 25 50 75 100 125 150 175 200 60 hzresistive or inductive load fig. 6 - typical reverse leakage characteristics i d , instantaneous reverse leakage current, ( ua ) v( br ) breakdown voltage, volts 100 10 1 0.1 0.01 0 2 4 6 8 1012141618 20 t a = 25 downloaded from: http:///
rectron transient voltage suppressors 1500w series tvs diodes / do-214ab ( case 4 ) 1500w type breakdown voltage v br ( volts ) min. max. @i t ( ma ) reverse stand off voltage v wm ( volts ) maximum reverse leakage at v wm i d ( ua ) maximum peak pulse current i ppm ( amps ) maximum clamping voltage at i ppm v c ( volts ) 1.5fmcj6.81.5fmcj6.8a 1.5fmcj7.5 1.5fmcj7.5a 1.5fmcj8.2 1.5fmcj8.2a 1.5fmcj9.1 1.5fmcj9.1a 1.5fmcj10 1.5fmcj10a 1.5fmcj11 1.5fmcj11a 1.5fmcj12 1.5fmcj12a 1.5fmcj13 1.5fmcj13a 1.5fmcj15 1.5fmcj15a 1.5fmcj16 1.5fmcj16a 1.5fmcj18 1.5fmcj18a 1.5fmcj20 1.5fmcj20a 1.5fmcj22 1.5fmcj22a 1.5fmcj24 1.5fmcj24a 1.5fmcj27 1.5fmcj27a 1.5fmcj30 1.5fmcj30a 1.5fmcj33 1.5fmcj33a 1.5fmcj36 1.5fmcj36a 1.5fmcj39 1.5fmcj39a 1.5fmcj43 1.5fmcj43a 1.5fmcj47 1.5fmcj47a 1.5fmcj51 1.5fmcj51a 1.5fmcj56 1.5fmcj56a 53.2 6.12 7.48 10 1010 10 10 10 1.01.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 1000 139 10.8 10.5 143 1000 5.80 7.14 6.45 6.75 8.25 6.05 500 128 11.7 7.13 7.88 6.40 500 133 11.3 7.38 9.02 6.63 200 120 12.5 7.79 8.61 7.02 200 124 12.1 8.19 10.0 7.37 50 109 13.8 8.65 9.55 7.78 50 112 13.4 9.00 11.0 8.10 10 100 15.0 9.50 10.5 8.55 10 103 14.5 9.90 12.1 8.92 5.0 92.6 16.2 10.5 11.6 9.40 5.0 5.05.0 5.0 5.0 5.0 5.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 96.2 15.6 10.8 13.2 9.72 86.7 17.3 11.4 12.6 10.2 89.8 16.7 11.7 14.3 10.5 78.9 19.0 12.4 13.7 11.1 82.4 18.2 13.5 16.5 12.1 68.2 22.0 14.3 15.8 12.8 70.8 21.2 14.4 17.6 12.9 63.8 23.5 15.2 16.8 13.6 66.7 22.5 16.2 19.8 14.5 56.6 26.5 17.1 18.9 15.3 59.5 25.2 18.0 22.0 16.2 51.5 29.1 19.0 21.0 17.1 54.2 27.7 19.8 24.2 17.8 47 31.9 20.9 23.1 18.8 49 30.6 21.6 26.4 19.4 43.2 34.7 22.8 25.2 20.5 45.2 33.2 24.3 29.7 21.8 38.4 39.1 25.7 28.4 23.1 40 37.5 27.0 33.0 24.3 34.5 43.5 28.5 31.5 25.6 36.2 41.4 29.7 36.3 26.8 31.4 47.7 31.4 34.7 28.2 32.8 45.7 32.4 39.6 29.1 28.8 52.0 34.2 37.8 30.8 30.1 49.9 35.1 42.9 31.6 26.6 56.4 37.1 41.0 33.3 27.8 38.7 47.3 34.8 24.2 40.9 45.2 36.8 25.3 42.3 51.7 38.1 22.1 44.7 49.4 40.2 23.1 45.9 56.1 41.3 20.4 48.5 53.6 43.6 21.4 50.4 61.6 45.4 47.8 18.6 58.8 19.5 53.961.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 downloaded from: http:///
rectron transient voltage suppressors 1500w series tvs diodes / do-214ab ( case 4 ) 1500w type breakdown voltage v br ( volts ) min. max. @i t ( ma ) reverse stand off voltage v wm ( volts ) maximum reverse leakage at v wm i d ( ua ) maximum peak pulse current i ppm ( amps ) maximum clamping voltage at i ppm v c ( volts ) 1.5fmcj621.5fmcj62a 1.5fmcj68 1.5fmcj68a 1.5fmcj75 1.5fmcj75a 1.5fmcj82 1.5fmcj82a 1.5fmcj91 1.5fmcj91a 1.5fmcj100 1.5fmcj100a 55.8 68.2 1.0 1.01.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 5.0 16.9 89.0 85.0 17.6 5.0 53.0 65.1 58.961.2 74.8 55.1 5.0 15.3 98.0 64.6 71.4 58.1 5.0 16.3 92.0 67.5 82.5 60.7 5.0 13.9 109 71.3 78.8 64.1 5.0 14.6 104 73.8 90.2 66.4 5.0 12.7 118 77.9 86.1 70.1 5.0 13.3 113 81.9 100 73.7 5.0 11.5 131 86.5 95.5 77.8 5.0 12.0 125 90.0 110 81.0 5.0 10.4 144 95.0 105 85.5 5.0 10.9 137 notes : 1. v br measured after i t applied for 300ms. i t = square pulse or equivalent. 2. for bidirectional use c or ca suffixs for all types (ex. 1.5fmcj6.8c,1.5fmcj200ca) electrical characteristics apply in both directions. 3. for bidirectional types having v wm of 10 volts and less, the i d iimit is doubled. 4. all devices ul listed file# e211196. 1.5fmcj1101.5fmcj110a 1.5fmcj120 1.5fmcj120a 1.5fmcj130 1.5fmcj130a 1.5fmcj150 1.5fmcj150a 1.5fmcj160 1.5fmcj160a 1.5fmcj170 1.5fmcj170a 1.5fmcj180 1.5fmcj180a 1.5fmcj200 1.5fmcj200a 1.01.0 1.0 1.0 1.0 1.0 5.05.0 5.0 5.0 5.0 5.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 1.01.0 5.05.0 99.0 121 89.2 9.9 158 105 116 94.0 10.3 152 108 132 97.2 9.1 173 114 126 102 9.5 165 117 143 105 8.4 187 124 137 111 8.7 179 135 165 121 7.3 215 143 158 128 7.6 207 144 176 130 6.8 230 152 168 136 7.1 219 153 187 138 6.4 244 162 179 145 6.7 234 162 198 146 6.1 258 171 189 154 6.4 246 180 220 162 5.4 287 190 210 171 5.7 274 downloaded from: http:///
mounting pad layout rectron dimensions in inches and (millimeters) 0.121 min.(3.07 min.) 0.060 min.(1.52 min.) 0.320 ref 0.185 max.(4.69 max.) downloaded from: http:///
|
